Parquet & Panel Installation
Acceptable Sub Floors
Parquet flooring can be laid over concrete or solid panel sub floors.
Parquet cannot be installed directly on to solid board sub floors. A parquet installation over solid-board subflooring requires 12mm or better underlayment panels.
Parquet is recommended for glue down installation using Ted Todd MS Flex only
Ensure Ted Todd Primerfast Vapour retarder has been applied unless with the use of under floor heating
A 15mm minimum expansion space must be left around the perimeter and all vertical obstructions.
Parquet can be laid in many different designs, consideration to the design you require will affect how you begin your installation.
To find the center of the room refer to Trammel Point Method